Comtrend Corporation CT-5071 Uživatelský manuál

CT-5071 ADSL2+ Router User’s Manual Version A1.2, February 10, 2006 261063-004

3.2 Login Procedure Perform the following steps to bring up the Web user interface and configure the CT-5071. To log on to the system from the Web

3.2.1 Default Settings During power on initialization, the CT-5071 initializes all configuration attributes to default values. It will then read t

Chapter 4 Quick Setup The Quick Setup allows the user to configure the ADSL router for DSL connectivity and Internet access. It also guides the use

4.1 Auto Quick Setup The auto quick setup requires the ADSL link to be up. The ADSL router will automatically detect the PVC. You only need to fol

STEP 2: Enter the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI). Select Enable Quality Of Service if required. Click Next. S

 PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE) 1. Select the PPP over ATM (PPPoA) or PPP over Ethernet (PPPoE) radio button and click Next. T

Disconnect if no activity The CT-5071 can be configured to disconnect if there is no activity for a period of time by selecting the Disconnect if no

3. After entering your settings, select Next. The following screen appears. This page allows the user to configure the LAN interface IP address, su

5. After clicking Save/Reboot, the router will save the configuration to the flash memory, and reboot. The Web UI will not respond until the syst

 MAC Encapsulation Routing (MER) To configure MER, do the following. 1. Select Quick Setup and click Next. 2. Enter the PVC Index provided by the

Preface This manual provides information to network administrators. It covers the installation, operation and applications of the ADSL router. The r

4. Click Next to display the following screen appears. Enable NAT checkbox: If the LAN is configured with a private IP address, the user should sel

5. Upon completion, click Next. The following screen appears. The Device Setup page allows the user to configure the LAN interface IP address and

After clicking Save/Reboot, the router will save the configuration to the flash memory, and reboot. The Web UI will not respond until the system is

 IP Over ATM (IPoA) To configure IP Over ATM, 1. Select Quick Setup and click Next. 2. Enter the PVC Index and click Next. 3. Type the VPI and VC

Enable NAT checkbox If the LAN is configured with a private IP address, the user should select this checkbox. The NAT submenu on the left side main

The user must configure the IP Address and the Subnet Mask. To use the DHCP service on the LAN, select the Enable DHCP server checkbox, and enter th

9. After clicking Save/Reboot, the router will save the configuration to the flash memory, and reboot. The Web UI will not respond until the system

 Bridging Select the bridging mode. To configure Bridging, do the following. 1. Select Quick Setup and click Next. 2. Enter the PVC Index and c

6. Click the Next button The following screen will be displayed. The WAN Setup-Summary screen presents the entire configuration summary. Cli

Chapter 5 Device Info After login, the Device Info screen appears as shown. Note: The selections available on the left side of menu are based up

Table of Contents CHAPTER 1 INTRODUCTION... 4 1.1 FEATURES ...

5.1 WAN Click WAN on the Device Info menu bar to display the configured PVC(s) and the status. VPI/VCI Shows the values of the ATM VPI/VCI Con.

5.2 Statistics Selection of the Statistics screen provides statistics for the Network Interface of LAN, WAN, ATM and ADSL. All statistics screens ar

31

5.2.2 WAN Statistics Service Shows the service type VPI/VCI Shows the values of the ATM VPI/VCI Protocol Shows the connection type, such as ppp

5.2.3 ATM statistics The following figure shows the ATM statistics screen. ATM Interface Statistics Field Description In Octets Number of received

ATM AAL5 Layer Statistics over ADSL interface Field Description In Octets Number of received AAL5/AAL0 CPCS PDU octets Out Octets Number of rece

5.2.4 ADSL Statistics The following figure shows the ADSL Network Statistics screen. Within the ADSL Statistics window, a bit Error Rate Test can be

Field Description Mode Modulation protocol G.DMT or T1.413 Type Channel type Interleave or Fast Line Coding Line Coding format, that can be selec

5.2.5 Route Choose Route to display the routes that the route information has learned. 5.2.6 ARP … Click ARP to display the ARP information.

5.2.7 DHCP Click DHCP to display the DHCP information. 38

6.6.2 Dynamic DNS ... 54 6.7 DSL ...

Chapter 6 Advanced Setup This chapter explains: WAN, LAN, Routing and DSL. VPI/VCI ATM VPI (0-255) / VCI (32-65535) Con. ID ID for WAN connect

For further information on WAN please reference section: 5.1, Page 29. 6.2 LAN Configure the DSL Router IP Address and Subnet Mask for LAN interface.

Subnet Mask: Enter the secondary subnet mask for the LAN port. 6.3 NAT Note: This option is not available for bridge mode. To display the NAT funct

Select a Service Or Custom Server User should select the service from the list. Or User can enter the name of their choice. Server IP Address Enter

6.3.2 Port Triggering Note: This option is not available for Bridge mode. Some applications require that specific ports in the Router's firewall

Select an Application Or Custom Application User should select the application from the list. Or User can enter the name of their choice. Trigger P

6.3.3 DMZ Host Note: This option is not available for Bridge mode. The DSL router will forward IP packets from the WAN that do not belong to any of t

6.4 Security 6.4.1 Parental Control Click on Parental Control in the menu bar. Then click Add.The following screen will be displayed. Input

Then click Save/Apply. The following screen will be displayed. 6.4.2 MAC Filtering Mac Filtering is only available for Bridged mode. Each network

Choose Add or Remove to configure MAC filtering rules. The following screen pops up when you click Add. Create a filter to identify the MAC layer

Chapter 1 Introduction The CT-5071 is a wired Local Area Network ADSL2+ router. One 10/100 Base-T Ethernet port provides wired LAN. The CT-5071 ADS

Set Multicast Click this button, it will automatically set the multicast MAC address. From Interface Select the incoming packet interface To Interfa

Filter Name Type a name for the filter rule. Protocol User can select from: TCP, TCP/UDP, UDP or ICMP. Source IP address Enter source IP addre

Incoming To add a filtering rule, simply click the Add button. The following screen will be displayed. To configure the parameters, please refer

6.5 Routing The Routing dialog box allows you to configure Default gateway, Static Route and RIP. 6.5.1 Default Gateway If ‘Enable Automatic Ass

6.5.2 Static Route Choose Static Route to display the Static Route screen. The Static Route screen lists the configured static routes, and allows con

6.6 DNS 6.6.1 DNS Server If 'Enable Automatic Assigned DNS' checkbox is selected, this router will accept the first received DNS assignment

Click on the Dynamic DNS button. The following screen will be displayed. 55

D-DNS provider Select a dynamic DNS provider from the list Hostname Enter the name for the dynamic DNS server. Interface Select the interface fro

6.7 DSL To access the DSL settings, First click On Advanced Setup and then click on DSL. The DSL Settings dialog box allows you to select an appropri

Chapter 7 Diagnostics The Diagnostics menu provides feedback on the connection status of the CT-5071 and the ADSL link. The individual tests are li

1.2 Application The following diagram depicts the application of the CT-5071. 5

Chapter 8 Management The Management section of the CT-5071 supports the following maintenance functions and processes:  System log  Update softw

8.1.1 Configuration Backup The Backup option under Management>Settings, save your router configurations to a file on your PC. Click BACKUP Settin

8.1.3 Restore Default Clicking the Restore Default Configuration option in the Restore Settings screen can restore the original factory installed se

NOTE: This entry has the same effect as the hardware reset-to-default button. The CT-5071 board hardware and the boot loader support the reset to de

8.2 System Log The System Log option under Management>Settings allows you to view the system events log, or to configure the System Log options.

Option Description Log Indicates whether the system is currently recording events. The user can enable or disable event logging. By default, it i

8.3 Internet Time The Internet Time option under Management menu bar configures the Modem’s time. To automatically synchronize with Internet timeserve

8.4 Access Control The Access Control option under Management menu bar configures the access-related parameters, including three parts: Services, IP A

8.4.1 Services The Services option limits or opens the access services over the LAN or WAN. These services are provided FTP, HTTP, ICMP, , SSH (Secur

8.4.2 Access IP Addresses The IP Addresses option limits the access by IP address. If the Access Control Mode is enabled, only the allowed IP addres

1.3 Front Panel LED Indicators The front panel LEDs are shown in the picture below, followed by an explanation in the table below. LED Color M

8.4.3 Password Change To change the current password, do the following. Select Username – root. Enter Old Password and New Password. Then enter the n

8.5 Update software The Update Software screen allows you to obtain an updated software image file from your ISP. Manual software upgrades from a loc

8.6 Save and Reboot The Save/Reboot option saves the configurations and reboots the router. Close the DSL Router Configuration window and wait for

Appendix A: Pin Assignments Line port (RJ11) Pin Definition Pin Definition 1 - 4 ADSL_TIP 2 - 5 - 3 ADSL_RING 6 - Pin Assignments of the RJ11 Port L

Appendix B: Specifications Rear Panel RJ-11 X1 for ADSL, Reset Button X 1, Power Jack X 1, Power switch X 1 ADSL Sta

74 Environment Condition Operating temperature 0 ~ 50 degrees Celsius R

Chapter 2 Installation 2.1 Hardware Installation In the rear panel, there is a reset button. It is used to load the factory default settings. Ho

and telephone lines from the wall outlet. Chapter 3 Login via the Web Browser This section describes how to manage the router via a Web browser vi